How to get rid of the dreaded phone case

You probably already know that your iPhone has a protective case.

Well, if you’re like me and your iPhone 4 has a case, you’ll need to get the new version of the Apple iPhone.

If you’re just looking to swap out the case for something else, you’re out of luck.

Luckily, it’s not a major deal and is actually pretty easy to do.

Read on for all the tips and tricks on how to get your phone back.

Read on for more information:How to remove the iPhone case from your iPhone:Remove the iPhone from the phone with the iPhone Case Detector.

You can also use a magnetic pull from the iPhone.

The iPhone 4 case comes with a removable battery, but you can also purchase a battery replacement for free.

The replacement battery comes in either the same plastic case or in a new, clear plastic one.

The clear plastic battery comes with three sizes, 1.25mm, 2.0mm and 3.0 mm.

The 3.5mm version comes in a red and white color.

If you’re using a USB Type-C port, you need to use a USB-C cable.

To use a Type-A port, the cable has to be longer than the iPhone 4.

Use the cable you purchased.

Remove the case from the connector.

The USB-A connector has a blue LED to show you when the connector is connected.

Use your iPhone to press the charging button.

The iPhone case comes in two colors, white and black.

The black case has a black zipper on the front and a black button on the back.

The white case has an orange zipper on front and white buttons on the rear.

The bottom part of the case has the letters “SP” and “R”.

The top part of it has the words “HELP”.

The iPhone case can be removed by unscrewing the bottom part.

The back and front of the iPhone are connected by a thin strip of plastic that is slightly longer than two millimeters.

There’s a metal pin that slides over the plastic, so it’s easy to use.

You don’t need to remove this plastic.

It’s there to prevent damage to the iPhone while it’s charging.

Remove the battery.

It comes with two screws that go through the battery and the protective cover.

Use a screwdriver to remove them.

The battery comes without a case.

You’ll need one if you want to swap the case.

The case will come off with the screws.

Use an iPhone to pull the battery out of the battery connector.

Remove it from the battery by gently squeezing the back and sides.

You will have to pull it out and then pull the cable that is attached to the battery until you get it out.

You may have to remove several screws at this point to get it to pop out.

If your iPhone is a 6.0, iPhone 6s, or iPhone 6 Plus, you can use the same method to get that case back.

You just need to unscrew the plastic and remove the case and battery.

You’ll also need a spare battery.

This battery is usually included with the case, but if you buy a battery separately, you might need to purchase a new one.

If the battery is still in the phone, the battery should come off easily.

Remove and replace the battery from the case with a new battery.

The case is a bit of a pain to remove.

You have to push it up against the bottom of the phone.

Once you’re done, it’ll slide right off.

To get the case back, just use a small flat screwdriver.

You can also replace the charging cable that comes with the battery with a micro USB cable.

If this cable is not compatible, you may need to buy a new cable.

You could also replace it with a longer cable that connects to the new charger.

The new iPhone case is made of a durable plastic that’s a bit more durable than the older iPhone 4 plastic.

The plastic is more comfortable to grip, and it’s thicker, so the case feels less slippery.

The phone case comes pre-loaded with a charging cable.

This cable will charge the iPhone, so you’ll be able to use it when you don’t want to use the phone and charge it.

You need to put it in your pocket and put it into the charger when you’re not using it.

To remove the charging connector from the cable, just remove the phone case with your finger.

The charging cable will come out with a tiny flat screw.

The battery and charging cable come with a protective cover that protects the phone from drops, scratches, and other impacts.

The protective cover comes with protective labels and instructions on how you can clean it.

You won’t be able get the charging case back without removing the case first.

To do this, you have to use your finger to lift the protective sleeve and slide it off.

The sleeve will come away from the back of the connector and